HP T3304 - Manual (Page 32)

USER CONFIG
PRINTER CONTROL
OFFLINE
IGP/PGL
USER CONFIG
PAPER CONTROL
PRINTER CONTROL
Media Handling
PRINTER CONTROL
Gap Sensor
Gap Sensor
None *
Gap Sensor
None *
Gap Sensor
Transmissive
Gap Sensor
Reflective
Gap Sensor
Reflective *
ONLINE
IGP/PGL
Selecting Gap Sensor
24 Operator’s Guide
GAP SENSOR selects the type of media
used for printing. The options for this
selection are as follows:
•
TRANSMISSIVE (see–through)
•
REFLECTIVE (black stripe)
•
NONE (default)
1
Press ON LINE/PAUSE to place the
printer in the off line mode.
2
Press to enter the configuration menus.
3
Press to reach the printer control menu.
4
Press to enter the printer control menu.
5
Press to reach the gap sensor
menu.
6
Press to enter the gap sensor menu.
7
Press to view the desired setting.
8
Press ENTER to select the setting.
9
Press ON LINE/PAUSE to place the
printer in the on line mode.