HP T3304 - Manual (Page 20)

loading media
12 Operator’s Guide
17
The peel-and-present option allows for
on-demand label dispensing. Although
the peel-and-present mechanism is
included with every printer, the label
present sensor and internal rewind
options are required to use this feature.
To use the optional peel-and-present,
follow the instructions outlined below.
a.
Turn off the printer, and open the
side access cover.
b.
Rotate the printhead latch
counterclockwise to raise the
printhead.
c.
Lower the hinge plate and the lower
front panel.
d.
Using a Philips screwdriver, remove
the tear bar, invert it (flip it over), and
reinstall it.
e.
Place the media supply roll on the
media hub assembly. Slide the
media retainer against the supply
roll, and tighten the thumbscrew.
f.
Route the media over the guide
plate, through the media sensor, and
over the platen roller (located
beneath the printhead).