HP T3304 - Manual (Page 23)

3–Inch Core
Adaptors
Media Hub
Assembly
Thumbscrews
Media
Supply Roll
Media
Retainer Media Hub
Assembly
Rewind Hub
unloading media
15 Operator’s Guide
6
To remove roll–fed media, proceed as
follows:
a.
Roll the media onto the media hub or
onto the rewind hub, as appropriate.
b.
If you have rolled the media onto the
media hub, slide the roll of media off
the hub.
c.
If you have rolled the media onto the
rewind hub, lower the lower
right-hand front panel.
Unroll the media from the hub, and
remove the clasp
d.
Lift and snap the lower right-hand
front panel closed.
7
To remove fan–folded media, proceed
as follows:
a.
If the rewind hub was not being
used, simply pull the media through
the loading slot and out of the
printer.
Go on to step 8 .
b.
If the rewind hub was being used,
finish rolling the media onto the hub.