HP Scanjet 8270 - Manual (Page 17)

The scan is sent to the destination selected in the HP Scanning dialog box.
11. When finished, remove the slides. Replace the slide light-shield, the negative
holder, and the TMA cover.
Scan negatives
To scan 35 mm negatives, use the negative holder that is part of the built-in TMA.
1.
Open the scanner lid and remove the TMA cover.
2. Remove the negative light-shield from the negative holder. The negative holder is
stored in the slide holder.
3. Slide a negative strip into the negative holder so that the shiny side faces the
scanner glass when the scanner lid is closed.
Note Negatives are easily damaged. Touch them only on their edges.
User Guide 15
English