HP Scanjet 8270 - Manual (Page 16)

3. Place up to three slides into the slide holder. Insert the slides with the front of the
slides facing you.
4. After loading the last slide, insert the slide light-shield until it touches the slides.
Note Inserting the slide light-shield prevents stray light on the scanned
image.
5. Close the scanner lid.
6. Click the Scan Picture button ( ).
The HP Scanning dialog box is displayed.
7. Select Picture.
8. Select Scan positives, including 35 mm slides, using the TMA.
If you want to preview the scanned image, select the Show Preview check box
on the screen, or begin the scan from HP Solution Center.
9. Click Scan.
10. Follow the instructions on the screen to finish scanning.
Chapter 3
14 HP Scanjet 8270 Document Flatbed Scanner