HONDA Outboard Motor BF150A - Manual (Page 59)

57
MAINTENANCE SCHEDULE
SERVICING YOUR OUTBOARD MOTOR
Distributor’s Limited Warranty
Follow the MAINTENANCE SCHEDULE table and service your outboard motor accordingly. Please note, a claim for
warranty coverage will not be denied simply because the maintenance schedule for your outboard was not followed.
However, any part(s) that fails specifically due to lack of maintenance, or improperly performed maintenance, would
not be covered under the .
For professional/commercial use, log hours of operation to determine proper maintenance intervals.
These items should be serviced by an authorized Honda marine dealer, unless you have the proper tools and are mechanically proficient.
Refer to the Honda shop manual for service procedures.
Lubricate more frequently when used in salt water. (1)
(2)
(3)
Engine oil
Gear case oil
Engine oil filter
ACG belt
Throttle linkage
Idle speed
Valve clearance
Spark plugs
Propeller and Cotter pin
Anode
Lubrication
Water separator
Check level
Change
Change
Replace
Check-adjust
Check-adjust
Check-adjust
Check-adjust
Check
Clean
Replace
Check
Check
Grease
Check
Each use After use
First month
or
20 hrs.
(2)
(2)
(2)
(2)
(1)
Every 6 months
or
100 hrs.
(2)
(2)
(2)
(1)
Every year
or
200 hrs.
(2)
(2)
(2)
(2)
Every 2 years
or
400 hrs.
ITEM
Perform at every indicated month or operating
hour interval, whichever comes first.
REGULAR SERVICE PERIOD (3)
05/02/22 14:33:59 31ZY6600_058