HONDA Outboard Motor BF150A - Manual (Page 47)

45
OPERATION
N (neutral)
CONTROL
LEVER
FAST IDLE BUTTON
If the engine is not properly
warmed-up bef ore raising the
engine speed, the buzzer and
overheat indicator may activate,
and the engine speed will be
automatically reduced. Using the electric starter f or more
than 5 seconds at a time will
overheat the starter motor and can
damage it.
Turning the ignition switch key to
the START position while the
engine is running can damage the
starter motor and f lywheel.
The cooling system may f reeze in
areas where the temperature
reaches 32°F (0°C) or below.
Cruising at high speed without
warming the engine up may cause
engine damage.
Before getting under way, allow
the engine to warm up sufficiently
to ensure good performance.
Above 41°F (5°C), warm up the
engine for at least 3 minutes.
Below 41°F (5°C), warm up the
engine for at least 5 minutes at
2,000 rpm. Push the fast idle
button then move the control lever
forward or reverse to open the
throttle and achieve approximately
2,000 rpm.
4.
05/02/22 14:32:12 31ZY6600_046