Usb configuration – HP Photosmart E317 User Manual

Page 69

Using the Setup Menu

camera was turned off. You may be prompted to update the

date and time the next time you power on the camera.

USB Configuration

This setting determines how the camera is recognized when

connected to a computer.
1. In the Setup Menu (page 65),

select USB.

2. In the USB Configuration

sub-menu, highlight one of these

two choices:
• Digital Camera—Causes the

computer to recognize the

camera as a digital camera using the Picture Transfer

Protocol (PTP) standard. This is the default setting on

the camera, and the setting needed to configure the

camera for printing to a PictBridge-certified printer.

• Disk Drive—Causes the computer to recognize the

camera as a disk drive using the Mass Storage Device

Class (MSDC) standard. Use this setting to transfer

images to a Windows 2000, 98SE, or Me computer

that does not have the HP Image Zone software

may be unable to use this setting with a Windows 98

computer that does not have the HP Image Zone

software installed on it.

3. Press the

button to save the setting and return to the

Setup Menu.

The new setting remains in effect until it is changed again,

even when you turn the camera off.