Hoshizaki STACKABLE CRESCENT CUBER KM-2000SRH3 - Manual (Page 28)

28
9) Close the Cleaning Valve.
10) Move the Control Switch to the “ICE” position.
11) Replace the Front Panel in its correct position.
12) Clean the Storage Bin with water.
13) Turn on the power supply, and start the automatic icemaking process.
2. MAINTENANCE INSTRUCTIONS 2. MAINTENANCE INSTRUCTIONS 2. MAINTENANCE INSTRUCTIONS 2. MAINTENANCE INSTRUCTIONS 2. MAINTENANCE INSTRUCTIONS
IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT
This icemaker must be maintained individually, referring to the instruction manual
and labels provided with the icemaker.
1) Stainless Steel Exterior
To prevent corrosion, wipe the exterior occasionally with a clean and soft cloth. Use a
damp cloth containing a neutral cleaner to wipe off oil or dirt build up.
2) Storage Bin and Scoop
• Wash your hands before removing ice. Use the plastic scoop provided (Bin Accessory).
• The Storage Bin is for ice use only. Do not store anything else in the bin.
• Keep the scoop clean. Clean it by using a neutral cleaner and rinse thoroughly.
• Clean the bin liner by using a neutral cleaner. Rinse thoroughly after cleaning.
3) Condenser (Remote Air-cooled model only)
Check the Condenser once a year, and clean if required by using a brush or vacuum
cleaner. More frequent cleaning may be required depending on the location of the
icemaker.