Hoshizaki STACKABLE CRESCENT CUBER KM-2000SRH3 - Manual (Page 25)

25
III. CLEANING AND MAINTENANCE INSTRUCTIONS III. CLEANING AND MAINTENANCE INSTRUCTIONS III. CLEANING AND MAINTENANCE INSTRUCTIONS III. CLEANING AND MAINTENANCE INSTRUCTIONS III. CLEANING AND MAINTENANCE INSTRUCTIONS
IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT
Ensure all components, fasteners and thumbscrews are securely in place
after any maintenance or cleaning is done to the equipment.
1. CLEANING INSTRUCTIONS 1. CLEANING INSTRUCTIONS 1. CLEANING INSTRUCTIONS 1. CLEANING INSTRUCTIONS 1. CLEANING INSTRUCTIONS
WARNING WARNING WARNING WARNING WARNING
1. HOSHIZAKI recommends cleaning this unit at least once a year. More
frequent cleaning, however, may be required in some existing water
conditions.
2. To prevent injury to individuals and damage to the icemaker, do not use
ammonia type cleaners.
3. Always wear liquid-proof gloves for safe handling of the cleaning and
sanitizing solution. This will prevent irritation from the solution contacting
skin.
IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT
1. The Cleaning Valve is used to provide access to the inside of the Evapo-
rator during the cleaning and sanitizing operation. It should be closed for
all icemaking operation. The Compressor will not operate unless this
valve is completely closed.
2. To open the Cleaning Valve, the Valve Handle should be parallel to the
valve body. To close the valve, the Valve Handle should be at a right angle
to the valve body.
CLOSED POSITION CLOSED POSITION CLOSED POSITION CLOSED POSITION CLOSED POSITION OPEN POSITION OPEN POSITION OPEN POSITION OPEN POSITION OPEN POSITION