Harbor Freight Tools CENTRAL PNEUMATIC 93257 - Manual (Page 2)

PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front cover.
Keep this manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment. Read all
instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or
wet locations. Do not expose to rain. Keep work area well lit. Do not use electri-
cally powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, or air hoses.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for
which it was intended. Do not modify this tool, and do not use this tool for a
purpose for which it was not intended.
SKU 93257 For technical questions, please call 1-800-444-3353 PAGE 2
Operating Air Pressure 70~125 PSI *
Average Air Consumption 4 CFM @ 90 PSI
Actuation System
Full Sequential Safety Trip Mechanism
Magazine Type Barrel Type, Nail Coil Canister w/Adjustable Nail Height
Magazine Capacity 250–400 Nails
Nail Type 0.082”–0.099” Shaft (12–14 Gauge), Wire-Collated Only
Nail Length Capacity 1 1 /
4
”–2 1 /
8
” Long
Air Inlet Size 1 /
4
”-18 NPT
Overall Dimensions 11 1 /
4
” L x 5” W x 11 1 /
4
” H
Unit Weight 5.7 Pounds
Accessories
Tool Oil, Hex Wrench**
**Refer to Inspection, Maintenance, and Cleaning, page 11, for proper usage.
REV 05j REV 06k
* The air pressure setting must not exceed job site regulations/restrictions. The air pressure set-
ting must not exceed 90 PSI when being used with work pieces that have a thickness of less than
1-3/4”.