HONDA FL5540K0 User Manual

Page 32

OPERATING INSTRUCTIONS

TRANSPORTING MATERIAL

Transport material to "unloading point" with

loader bucket as

low as possible to prevent

spillage

and

maintain maximum

stability.

During transport the loader

should be in a position that will not impair

vision,

Observe the following safety messages.

any overhead wires or

obstacles when loader

raised, to avoid

damage or possible death by electrocution.

-A loaded bucket should be

transported In a low position at

ground

speeds, especially

the

ground is irregular.

Make turns slowly and use the tractor brakes

cautiously. Afull bucket In the raised position
alters the center of gravity of the

and

Increases the possibility of mishaps.

not

or carry personnel

on a loader or attachment; a

or fall could

cause serious Injury.

UNLOADING

As the tractor approaches the "unloading

point", raise the loader to the height required

for clearance

"dump" bucket.

Drive slowly to position bucket above

"unloading point", stop tractor and dump
bucket.

NOTE:

not raise loader higher than

required for "dumping" clearance.

As "dumping" clearance height increases, the

bucket position must be adjusted to maintain
a level bucket to prevent excessive spillage
of material from bucket.