Front loader assembly – HONDA FL5540K0 User Manual

Page 21

FRONT LOADER ASSEMBLY

'DRAULIC PUMP MOUNTING

Pump mounting plate and pump drive joint
are installed on pump. Ensure bolts and

set screw are tight.

Attach the pump brackets to the pump

mounting plate using two each

inch

bolts and

5/16"

flatwashers. The right

bracket is shorter than the left.

not

tighten the bolts at this time.

Apply a light coating of grease to tractor
front PTO at this time.

Mount hydraulic pump to tractor by sliding

splined pump drive joint onto front PTO
shaft with mounting brackets inside main
frame and attaching with four

inch

bolts

and

lockwashers. Tighten

all

pump mounting bolts.

NOTE: The masts and main frame come

.assembled. All cylinders and hoses 'have

been attached to the frame except the

two

hoses from the hydraulic pump.

Set the loader on its stands and move the

tractor centrally between the masts.

PUMP

MOUNTING

PLATE

LEFT BRACKET

RIGHT BRACKET

LOADER INSTALLATION