HONDA FL5540K0 User Manual

Page 25

FRONT LOADER ASSEMBLY

LOADER STAND REMOVAL

12.

Raise the loader with the loader control
until the stands clear the ground.

13.

Remove latch pin from the stands and
remove the stands.

14.

Align the hole in the

bottom of the stand

with the mounting hook at rear of

mainframe. Slide the stand over the
mounting hook and then insert the latch
pin previously removed through main

frame and through the stand. Repeat the
above steps for the other side. Lower the

loader to the ground.

Front Loader is ready to become operational.

MOUNTING HOOK