HONDA FL5540K0 - Manual (Page 15)

SUB-FRAME and COUNTERWEIGHT
SUB-FRAME and
COUNTERWEIGHT
- -
1. Remove the existing frame lower cover
and replace with the new lower cover
using existing mounting bolts and collar
washers.
Never operate the tractor without
the lower cover.
INSTALLATION INSTRUCTIONS
1
ME WE
29
0 9
NEW LOWER
FRONT COVER
ME FRAME CAN BE ME
ME
Note: A second label is included with this
operator's manual. Install this label onto the
original
frame lower cover.
2. Remove the drawbar and replace it with
the bottom bracket using the two
12 x 25mm hex hd capscrews with
washers and two 10 x 30mm hex hd
capscrews with washers.
Torque front cover and rear bracket bolts as
Bolts 29 ft-lbs. (29 Nm).
12mm Bolts 43 ft-lbs. (60 Nm).
follows:
DRAWBAR BOLTS
. . . . .
BRACKET
13