Tractor preparation – HONDA FL5540K0 User Manual
Page 12
TRACTOR PREPARATION
HARDWARE BAG CONTENTS
QNT'Y
DESCRIPTION
5
2
x
30mm
hex
hd
capscrew
2
12mm
x
25mm hex hd
capscrew
2
hex hd
capscrew
16
12
0
ga. machine bushing
2
hex
hd capscrew
2
flat washer
2
hex
hd capscrew
2
2
4
6
4
4
4
2
2
2
2
1
hex
nut
lockwasher
hex
nut
flat washer
lock
washer
8
x
1
hex
hd
capscrews
5/16"
lockwasher
flatwasher
hex
hd capscrew
flatwasher
#
2
hose clamp
nylon
tie
TRACTOR PREPARATION
This loader is not intended to be used with any other attachments mounted on tractor.
REAR COUNTER WEIGHT
DO NOT EXCEED THE RATING
FOR
MAXIMUM
GROSS
VEHICLE WEIGHT.
REFER TO OWNER'S MANUAL PROVIDED WITH TRACTOR.
The use of adequate rear countenveight is required for proper loader stability.
Refer to Tractor Owner's Manual for specific recommendations on counterweighting tractor.
Weight added to the rear of the tractor provides better traction and easier, more efficient loader
operation. The tractor must be counterweighted by installation of rear weights.
Additional counterweight requirements will vary with loader attachments and equipment
applications.
specific conditions may not permit safe use
of
loader at loader rating
or may require more carefully restricted Operation at
the
rated load.
ROLL-OVER PROTECTION STRUCTURE (ROPS) SYSTEM
The tractor ROPS system must be in place and used properly to ensure adequate operator
protection.
LOADER HYDRAULIC SYSTEM
Follow
recommendations in this operator's manual for hydraulic fluid specifications.
TRACTOR
TIRES
Selection of tires should be restricted
recommendations as specified by your
Tractor owner's manual.
Ag tires are recommended when using the front loader
TIRE INFLATION
Front tires must be maintained at the maximum recommended inflation with the added weight
of loader and material.
Ag
Tire pressure
34
psi.
Rear tires must be maintained at equal pressure within the recommended tire inflation range.
Ag Tire pressure
24
psi.
10