Hoover E1 - Manual (Page 8)

8
2.4 Unscrew measuring cap
from back side of Clean Water
Solution Tank.
2.5 Fill measuring cap with
solution 2 times (approximately
4 oz.) and pour into Clean Water
Solution Tank.
2.6 Fill remaining Clean Water
Solution Tank with hot tap water.
Replace cap.
2.7 Place bottom of Clean
Water Solution Tank into
cleaner and rotate top into
position until the lever snaps
into place.
2.8 Plug cord into electrical
outlet. Step onto handle release
pedal to put into cleaning
position.
2.9 Turn on cleaner.
POWER
ON/OFF
SWITCH
carpet cleaninG
preparinG clean water solution tank witH deterGent
2.4
2.5
2.8 2.7
2.9
2.6
• IMPORTANT •
• Use only Hoover ® Brand Detergents.
• Using other cleaning solutions may cause excessive foaming. Excessive foam will cause the float
to shut off the vacuum prematurely.
• Using other detergent will void your warranty.
• NOTICE •
• Never leave unit unattended
with power on.
• Turn OFF when emptying
and filling tank.
• Do NOT oversaturate the
carpet.