HP VLI 8 PC - Manual (Page 26)

2 How to Install and Replace Components In Your Desktop PC
Installing Accessory Boards
68
8 The accessory board may need a special connection, such as:
• WOL (Wake on LAN) connector to the Network board.
• CD-ROM drive to the sound board (if you no longer want to use
the integrated audio).
For more information, refer to the documentation that came with
the accessory board. The necessary cables are usually provided with
the accessory board.
NOTE
If you install a network board and connect it to the WOL connector, you
must enable the
Suspend Wake-Up/Integrated Network and/or
Integrated Network fields in the Power menu of the PC’s Setup
program. This only applies if the network board supports these modes.
To enter the Setup program, press F2 during startup.
If you install an add-on sound board (and you no longer want to use the
integrated audio), you must set the
Integrated Audio Interface in
the Advanced menu of the Setup program to Disabled .
9 Replace the cover (described in this chapter).
WOL Connector
Integrated Audio Connector
If you install an add-on sound
board, remove the cable in this
connector and insert it into the
sound board’s connector.