Maintenance – Homelite UT10582 User Manual

Page 27

Text mode
Original mode

Page 27 — English

Fig. 40

rotate ClutCh Cover loCk

knoB CloCkwiSe to SeCure

Chain

tenSioning dial

ClutCh Cover

loCk knoB

MAINTENANCE

The chain is correctly tensioned when there is no
sag on the underside of the guide bar, the chain is
snug, but it can be turned by hand without binding.
Ensure that the chain brake is not set.
NOTE: If chain is too tight, it will not rotate. Loosen

the clutch cover lock knob by pressing in and
slightly rotating counterclockwise, then rotate the
chain tensioning dial counterclockwise. Lift the
tip of the guide bar up and retighten the clutch
cover lock knob securely. Ensure that the chain
will rotate without binding.

Fig. 39

adjuSting pin

ClutCh

Cover

SproCket

Chain tenSioning

pin hole

Fig. 41

Fig. 42

tighten

Chain

looSen

Chain