HP PCI SCOPE PREPROCESSOR FSPCI64S - Manual (Page 16)

16
information on the electrical loading of the MultiProbe Pod refer
to your Hewlett-Packard MultiProbe specification.
All PCI Local Bus operations supported.
Operating:0 to 55 degrees C (+32 to +131 degrees F)
Non operating:-40 to +75 degrees C (-40 to +167 degrees F)
Operating: 4,6000m (15,000 ft)
Non operating: 15,3000m (50,000 ft)
Up to 90% non condensing. Avoid sudden, extreme
temperature changes which would cause condensation on the
preprocessor module.
There are no automatic performance tests or adjustments for the
PCI Scope Preprocessor module. If a failure is suspected in the
PCI Scope Preprocessor module contact the factory or your
FuturePlus Systems authorized distributor.
The repair strategy for the PCI Scope Preprocessor is module
replacement. However, if parts of the PCI Scope Preprocessor
module are damaged or lost contact the factory for a list of
replacement parts.
Operations
Environmental
Temperature
Altitude
Humidity
Testing and
Troubleshooting
Servicing