Hitachi 26LD9000TA - Manual (Page 23)

23
ENGLISH
MENU OPERATION (continued)
Setup Menu (TV mode)
With this menu, you can access various kinds of features relating to TV channel settings.
Setup
Auto Tuning
Manual Tuning
Fine Tuning
Sort
Teletext Language
Select OK Set Return
!
Selected Items Setup hint
Position
Select the way to display the channels on the screen.
The position numbers are displayed on the screen.
(1~125)
Mode
Direct
The channel number 1~57 are displayed as C
, and the
channel number 101~142 are displayed as Z
.
Auto Tuning
Search
Tune the local channels automatically.
Press ! OK !button to start searching.
Position
Press WX buttons to input position number (1~125) or channel
number (C
or Z
).
When Auto Tuning Mode is set to [position], search the
frequency by using
WX buttons.
Frequency
When Auto Tuning Mode is set to [Direct], this function is not
available (grayed out).
Name
1. Move the cursor to the first digit and select the letters with
Ÿź buttons.
2. Move to the next digit with Xbutton.
3. Press OK button again when you finish inputting all the
letters.
• The selectable letters are as follows: “0”~”9”, “A”~”Z”, “+”,
“ ” (blank), “- “, “_” (under line), and “.” (period).
Auto
B/G
I
D/K
Manual Tuning
Sound System
M
Select the sound system from 5 different modes.
NOTE
When you turn ON the television for the first time, your television is at “the original factory setting” and cannot display the
image normally on the TV screen. Please select Auto Tuning and set TV channel.