Hunter Fan 44110 - Manual (Page 50)

0
5. My heating or cooling will not turn on or off.
5 a. Check the Heat/Cool function switch to ensure it is set to the desired position.
5 b. Wait. There may be as much as a 4-minute delay before the system turns on or
off to protect the compressor.
5 c. Check the circuit breakers and switches to ensure there is enough power to the
system.
5 d. Replace the batteries.
5 e. If applicable, make sure the furnace blower door is closed properly.
5 f. If your system has 4 wires, ensure the jumper wire is installed between the RC
and RH terminals.
.............................................................................................
6. The display will come on, but it will not stay illuminated.
6 a. Replace batteries.
troubleshooting