Hunter Fan 44110 - Manual (Page 35)

methoDs of operation, cont.
3. CREATING CUSTOM PROGRAMS
• Program times can be set in 10 minute increments.
• Program temperature can be set in increments of 1 o F (1 o C).
• After 15 seconds of inactivity during programming, the
thermostat will return to Normal Display mode.
• When setting each program time, note the AM/PM indicator.
• Press
Hold/Return
at any time to exit Program mode.
• During normal operation, if no button is pressed for 5
seconds, the unit will return to the Normal Display mode.
1. Slide the
system
switch to
HEAT
or
COOL
to program the
corresponding system.
2. Press
Program
to enter Program mode.
(The LCD will begin to
flash.)