Hunter Fan 44110 - Manual (Page 19)

1
ATTACHING THE THERMOSTAT
1. Lift the thermostat cover and set the
SYSTEM
switch to
OFF
and the
FAN
switch to
AUTO
.
2. Locate the
HE/HG
switch on the back of the thermostat. Set
the switch to
HG
(default) for gas furnace and oil burners. Set
the switch to
HE
for electric furnaces.
(The switch has no effect when the system is set to cooling mode.)
3. Locate the
Auto Recovery
switch on the back of the
thermostat. If you wish to use the Energy Star compliant
Auto Recovery feature, verify that the switch is in the ENABLE
position. If you do not wish to use this feature, simply change
the switch to the DISABLE position. See pages 44-45 for more
information.
installing the thermostat, cont.