Adjustment – Hansol Multitech Uromat 3000 User Manual
Page 49
06/00 - 49 of 90 - 0116 7201
Rev. 00 © 2000 Hans Pausch Röntgengerätebau Graf-Zeppelin-Str. 1 D-91056 Erlangen ALL RIGHTS RESERVED Ru
3. Adjustment
Caution: If changes are made to the movement paths, the software must
afterward be corrected.
3.1 Tube Unit Support Arm
Check the tube unit support arm (Fig. 51/Pos. 1) with the spirit level (Pos. 2) and loosen the
nuts (Fig. 51a/Pos. 5) and the mounting screws (Fig. 51b/Pos. 6). Correct any differences
with the screws (Pos. 8). Retighten the mounting screws and nuts.
Fig.51 Fig.51a
Fig.51b Fig.52