Hustler Turf FasTrak 36" & 42" Decks none - Manual (Page 81)

333559 09/08 9-11
battery voltage. If the battery voltage is satisfactory, check the cleanliness and tightness of the terminals and
ground connections. A general understanding of electrical servicing and use of basic test equipment is neces-
sary for troubleshooting and repair.
Major overhaul or repair of the starting motor or charging system should be performed by trained techni-
cians only.
Access to integrated pump/motor units
The integrated pump/motor units are accessed by lifting the seat platform. The seat platform is hinged at
the front. The seat platform is hinged at the front. To raise it, remove the lock nut and flat washer and tilt seat
platform up and forward (FIG. 4).
If the seat is equipped with the optional arm rest kit, make certain to place the control arms in the park
brake position and pivot the arm rests upward before placing the seat platform in the full forward position to
prevent damage to the arm rests.
Hydraulic system
FIG. 3
FIG. 4
FUSES
LOCK NUT
FLAT WASHER