Hoover QS Quiet - Manual (Page 13)

Push used bag holder
and lift out.
Grasp edges of collar section and
push opening of collar section of
new bag onto holder. Make sure
collar is pushed completely up to
the ridge on the holder.
Adjust bag around the motor
housing and open the folds of the
bag to allow the bag to properly
fill.
Make sure all four folds are
open.
Note: A bag that does not expand properly may restrict air flow. In this
event, check the bag, making sure all the folds are open. High suction on
some carpet surfaces can cause the nozzle to hug the carpet and also
restrict air flow. When this occurs, reducing the suction with the Suction
Regulator may be helpful.
12