Hoya H01-201106 - Manual (Page 79)

77
S
h
o
o
ting
F
unc
tion
s
4
2
Turn the e-dial to adjust the
value.
5 appears on the monitor before the
value that can be changed.
The following parameters can be changed
depending on the selected exposure
mode.
3
When set to a mode, press the
mc
button (1), and then turn
the e-dial (2) to change the
aperture value.
The exposure compensation value can
be adjusted by this operation in e/b/c
mode. (p.80)
e
Item set in [Green Button] of the [A Rec. Mode 3] menu (p.146)
b
Shutter speed
c
Aperture value
a
Shutter speed
• A proper exposure may not be obtained with the selected shutter speed and
aperture value when the sensitivity is set to the fixed value (p.75).
• Use an optional ND (Neutral Density) filter if the subject is too bright. Use a
flash if it is too dark.
• In a mode, the difference from the proper exposure is displayed in a bar
graph while the shutter speed or aperture value is adjusted. The exposure
value is displayed in red when the difference from the proper exposure
becomes ±3.0 or larger.
• You can set the function of the d/i button when the exposure mode is set
to a. Set in [Green Button] of the [A Rec. Mode 3] menu. (p.147)
• Sensitivity values higher than ISO 1600 are not available when the shutter
speed is set to 2 sec. or slower in b/a mode.
1/ 2000 1/ 2000 F2.8 F2.8 1600 1600 [ 37] [ 37]
2
1