HP Raining DataCorp. mvEnterprise - Manual (Page 61)

mvEnterprise Release 4.1 on AIX Installation Guide Page 59
2.4 Configure the System to use Ethertape
2.4.1 Update the System to use Ethertape
For new installations, a system configuration file must be changed in
order to use ethertape.
1. Ensure that you are logged in as root.
2. Edit the system configuration file. Type:
vi /etc/pse.conf
3. Locate the appropriate headings, remove the comment symbol from
these lines if necessary, and save the changes.
# PSE communication protocols
d+ xtiso unixdg /dev/xti/unixdg # unix domain datagrams
d+ xtiso unixst /dev/xti/unixst # unix domain byte-stream
d+ xtiso udp /dev/xti/udp # UDP/IP
d+ xtiso tcp /dev/xti/tcp # TCP/IP
# PSE modules
m timod # TLI module
m tirdwr # TLI read/write interface
4. Reboot the machine to implement the changes.