haier AE122BCAAA (H2EM-18H03) - Manual (Page 11)

10
Decrease2*
Set
Operation instruction
Sleep operation
Before going to bed, you can press the SLEEP button, the air conditioner will operate
in comfort sleep mode to make you have a sound sleep.
Before using this function, you should calibrate the clock first, otherwise, the SLEEP
function will be out of order.
Use of SLEEP function
After turning on the unit, setting the working mode, then press SLEEP button to
make the air conditioner have the previous Sleep time (powered on for the first
time or after performing Sleep is 1h). The Sleep symbol will appear. Press time
/ button, you can choose between 1~8h. Each press, it may increase/decrease
1h and will display in the humidity area with ìxhî, and display ìTimer Offî in
Timer Off area and the time to turn off; press Sleep button again to cancel Sleep
Operation modes
1.In COOLING, DEHUMIDIFYING operation
1 hour later in SLEEP operation, the temperature
will increase 1C from the set temperature, another
1 hour later increase another 1C, then the unit
will operate continuous for 6 hours, then it turns
off automatically. The temperature is higher than
set temperature to prevent you from getting a cold.
2.In HEATING operation
1 hour later in SLEEP operation, the temperature
will decrease 2C from the set temperature, another
1 hour later increase another 2C, then the unit
will operate continuous at this temperature for 3
hours, then it increases 1C, after operating at this
temperature for another 3 hours, the unit
will turn off automatically. The temperature is
lower than set temperature to prevent you from
feeling uncomfortable during sleep.
3.In AUTO operation
The air conditioner will operate in the relative Sleep
operation according to the operation mode.
4.In FAN operation
SLEEP operation cannot be applied.
After setting Sleep function, it is not permitted to adjust clock.
The Sleep time is less than 8h, after reaching the set time, the unit will automatically stop.
Set Sleep function after setting ìTimer Offî function, the air conditioner will perform Sleep function.
After setting Sleep function, the Timer function cannot be set.
Set Sleep function after setting ìTimer Onî function, the Sleep function can only be set in the set time
of Timer On.
Note:
SLEEP operation starts SLEEP operation stops
about 6 hours
1hour
1hour
Set temperature turn off
turn off
In COOLING and DEHUMIDIFYING operation
Set temperature
1hour
1hour
Increase 1*
Increase 1*
Decrease2*
About 3 hours
Increase 1* 3 hours
SLEEP operation starts SLEEP operation stops
In HEATING operation
Mode Fan Speed Swing
Temperature
Clock
Timer
Set
Sleep
Aux.HeatFileter Reset
Reset
ON/OFF