Hoshizaki KM-1601MRH/3 - Manual (Page 26)

26
2. Drain the water tank:
1) Turn off the power supply, then remove the front panel. Move the control switch to the
"OFF" position.
2) Remove the insulation panel.
3) Remove the rubber cap covering the overflow pipe in the water tank. Remove the
overflow pipe by turning it counterclockwise. Allow the water tank to drain. See Fig. 14.
4) Replace the overflow pipe, the rubber cap, and the insulation panel in their correct
positions.
5) Remove all ice from the storage bin. Clean the storage bin using a neutral cleaner.
Rinse thoroughly after cleaning.
6) Replace the front panel in its correct position.