Humax ND-1200C - Manual (Page 42)

41
• Diagonistics
Set-Top Box hardware/software information display.
To view information on the operational environment of the Set-Top Box, complete the
following procedures.
1. Select ‘Diagonistics’ in ‘System Settings’ screen and then press the OK ( )button.
2. A new window appears displaying all information on current status including
Set-Top Box hardware, and software release notes, version, tuning status, etc.
• Urgent Message Alert
This function allows the subscribers to determine whether to display urgent messages
on the screen immediately or not. You can enable or disable this function as follows:
1. Press “Urgent Message Alert” in the “Systems Settings” menu.
Press the OK ( )button.
2. A new window appears allowing you to select ‘Enable’ or ‘Disable’.
If ‘Enable’ is selected, the emergency message is displayed on the screen immediately
on arrival.
If ‘Disable’ is selected, the message icon is not displayed on the screen.
Note: In such a case, the user would not know if a new message has arrived.
To check for messages, the user has to access the B-mail icon.
• Set Up A New Card
This function enables copying the viewing information of the existing card to a new one
when you are replacing Set-Top Box card with a new card.
1. Select ‘Set Up A New Card ‘ option in the ‘Systems Setting’ menu and then press the
OK ( )button.
2. A screen appears asking you to confirm new card installation once again.
Select ‘Yes’ to proceed to the next step, or select ‘No’ to return to System Settings
menu screen.
3. Follow the instructions on the screen.