Humax ND-1200C - Manual (Page 32)

31
Press OK and the following screen will appear.
3. Input PIN code and then specify desired rating from the options displayed using the
button, and press OK ( )button.
In the illustration above, all content of the rating U and UA will be locked.
The symbol indicates that the rating has been selected.
Caution:
• Once the Parental Lock function is configured, all the Channels higher than the
specified grade will be blocked by an interruption screen while watching TV.
If you enter the PIN code at this time, then the interruption screen disappears,
and you can watch the Channel.
Programmes of ratings lower than the specified grade are not affected.
Note:
• Default PIN code is ‘0000’.
You can configure the PIN code by using the ‘Select Key Code’ function in the
‘Personal Settings’ menu.