Humax ND-1200C - Manual (Page 41)

40
5. Functions Guide
Caution: This function is for installation personnel only.
Please do not use this function, if you are not familiar with the procedures for
configuration of Set-Top Box environment.
The selected screen consists of the following 5 menus.
Each menu provides the following function.
• Select Your Signal
To check the signal reception status, complete the following procedures.
1. Press the OK ( )button in the System Settings menu.
2. The Channel select screen appears.
Select the appropriate Channel, and press the OK ( )button.
Displays current signal status of the selected Channel by displaying signal
strength, signal quality and BER (Bit Error Rate). If the Set-Top Box is not properly
installed or there is a problem, the values displayed are very low.
6. System Settings