Hunter Fan UNIVERSAL FAN AND LIGHT REMOTE CONTROL 27188 - Manual (Page 9)

9
41797-01 • 07/06/10 • Hunter Fan Company
6 • Operation
Light Operation:
• Turn ON wall switch. The light will turn ON at maximum brightness.
• Press and quickly release either light button on the hand held remote to turn the light OFF or ON.
The light will come ON at maximum brightness.
• After a power outage, the light will turn ON when power is restored. Press and quickly release one of
the light buttons once to turn the light back off after a power outage.
• Press and hold either light button for more than 1 second to activate the dimming cycle.
• Press to turn the light ON at the maximum level and dim
• Press to turn the light ON at a low level and brighten
• Release the light button when the desired light level is reached.
• Continue to hold the light button to repeat the cycle. (Maximum–light level decrease–OFF)
2. Fan Operation:
• Press the High (3), Medium (2), or Low (1) speed buttons to turn the ceiling fan ON at the desired
speed.
• Press the fan “0” key to turn the ceiling fan OFF.
For best fan operation: Start the fan on High, and then select the
desired speed.
Reversing
Switch
Up
Dimmer
Down
Dimmer
Figure 13