beautypg.com

Technical specifications, Quickspecs, Hp proliant microserver – HP PROLIANT DA - 13716 User Manual

Page 19: Hp proliant microserver technical specifications

background image

System Unit

System Unit

System Unit

System Unit

Dimensions

Dimensions

Dimensions

Dimensions (HxWxD)
(with feet)

10.5 x 8.3 x 10.2 in (26.7x 21.0 x 26.0 cm)

Weight

Weight

Weight

Weight (approximate)

Maximum
(all hard drives, power
supplies, and processors
installed)

21.16 lb (9.6 kg)

Minimum
(one hard drive, power
supply, and processor
installed)

13.18 lb (5.98 kg)

Input Requirements

Input Requirements

Input Requirements

Input Requirements
(per power supply)

Rated Line Voltage

100 -- 127 VAC,
200 - 240 VAC

Rated Input Current

3.5 A (at 110 VAC),
2 A (at 200 VAC)

Rated Input Frequency

47 to 63 Hz

Rated Input Power

191.4 W (at 100 VAC),
184.9 W (at 200 VAC)

BTU Rating

BTU Rating

BTU Rating

BTU Rating

Maximum

247.055 BTU/hr (at 100 VAC),
274.505 BTU/hr (at 200 VAC)

Power Specifications

Power Specifications

Power Specifications

Power Specifications

To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL:

http://www.hp.com/go/hppoweradvisor

Power Supply Output

Power Supply Output

Power Supply Output

Power Supply Output
(per power supply)

Rated Steady-State Power 150 W (at 100 VAC),

150 W (at 200 VAC)

Maximum Peak Power

200 W (at 100 VAC),
200 W (at 200 VAC

System Inlet Temperature

System Inlet Temperature

System Inlet Temperature

System Inlet Temperature Operating

10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if operating
with a fan fault or above 35°C (95°F).

Non-operating

10 to 90% relative humidity (Rh), 28°C
5 to 95% relative humidity (Rh), 38.7°C

Altitude

Altitude

Altitude

Altitude

Operating

3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).

Non-operating

9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).

Acoustic Noise

Acoustic Noise

Acoustic Noise

Acoustic Noise
(Fully Loaded)

Idle

L WAd

3.9 BELS

L pAm

22.3 dBA

QuickSpecs

HP ProLiant MicroServer

HP ProLiant MicroServer

HP ProLiant MicroServer

HP ProLiant MicroServer

Technical Specifications

DA - 13716 Worldwide — Version 10 — March 23, 2011

Page 19