Removing the computer access panel and front bezel – HP DC5000 User Manual

Page 13

Text mode
Original mode

Hardware Reference Guide

www.hp.com

2-3

Hardware Upgrades

Removing the Computer Access Panel and
Front Bezel

To remove the computer access panel:

1. Turn off the computer properly through the operating system,

then turn off any external devices.

2. Disconnect the power cord from the power outlet and the

computer, and disconnect any external devices.

CAUTION: Before removing the computer access panel, ensure that the
computer is turned off and that the power cord is disconnected from
the electrical outlet.

3. On the top of the computer, locate the cover latch. Pull up and

hold

the latch 1 to release the computer access panel.

4. Slide the computer access panel back 2 about 0.5 inch (1.25 cm),

then lift the access panel up and off the chassis.

Removing the Computer Access Panel