beautypg.com

Hayter Mowers 405607x52A User Manual

Page 5

background image

GB

5

F-050743L

CONTENTS

INTERNATIONAL PICTORIALS

5

OWNER’S INFORMATION

6

SAFE OPERATION PRACTICES

6

ASSEMBLY

7

OPERATION

8

MAINTENANCE

9

TROUBLE SHOOTING CHART

13

MURRAY, INC.

TWO YEAR LIMITED WARRANTY

Murray, Inc. warrants to the original purchaser

that this unit shall be free from defects in

material and workmanship under normal use

and service for a period of Two (2) Years from

the date of purchase; however, this warranty

does not cover engines, accessories (such as

snow blowers, snow blades, grass baggers and

ploughs), transmissions, batteries and Normal

Wear Parts (except as noted below) or

transaxles as the companies that manufacture

these items furnish their own warranties and

provide service through their authorized field

service facilities. For additional information, see

the warranties covering these particular parts. If

you are uncertain whether your unit contains or

is equipped with one or more of these parts,

consult your dealer prior to purchase. Subject to

the terms and conditions noted in this Limited

Warranty, we shall, at our option, repair or

replace at no cost to the original purchaser any

part covered by this Limited Warranty during the

applicable warranty period.

In the event the battery proves defective within

ninety (90) days from the date of purchase, we

will replace it without charge. If the battery

proves defective after (90) days but within one

hundred twenty (120) days from the date of

purchase, we will replace it for a charge of one

half (1/2) of the retail price of the battery in effect

at the time of return.

Normal Wear Parts are defined as belts, blades,

blade adapters, pneumatic tyres, headlights and

seat covers. These parts are warranted to be

free from defects in material and workmanship

as delivered with the product. Any claim for

repair or replacement of Normal Wear Parts

must be made within thirty (30) days of the date

of purchase. No claims involving damage

caused from material use, abuse or misuse will

be honoured.

This Murray, Inc. Two (2) Year Limited

Warranty is your exclusive remedy; however,

this warranty is void or does not apply to any

unit that has been tampered with, altered,

misused, abused or used for rental or other

commercial and/or professional

(non-homeowner) uses. Your warranty does not

cover minor mechanical adjustments which are

not due to any defect in material or

workmanship. For assistance in making such

adjustments, consult your Instruction Book.

To make a claim under this Murray, Inc. Two (2)

Year Limited Warranty, return the unit (or if

authorized in advance, the defective part) along

with your proof of purchase to an Authorized

Service Centre near you. To locate the nearest

Authorized Service Centre, call the Central Parts

Distributor for your area shown in the list

provided with your unit or check the Yellow Page

listings in your local telephone directory. If you

return the entire unit, we will repair the unit. If we

authorize the return of the defective part only, we

will either replace or repair the part. In the case

of a defect in a transmission or differential (as

distinguished from a transaxle), the entire

transmission or differential must be returned

since they do not include user serviceable parts.

This Murray, Inc. Two (2) Year Limited

Warranty gives you specific legal rights, and

you may also have other rights which vary from
state to state.

This Limited Warranty is given

in lieu of all other expressed and implied

warranties including the implied warranty of

merchantability and warranty of fitness for a

particular purpose. If you need additional

information on this written warranty or

assistance in obtaining service, write:

HAYTER LIMITED,

Service Department,

Spellbrook,

Bishop’s Stortford,

Hertfordshire. CM23 4BU.

MURRAY, INC.

International Sales

P.O. Box 268

Brentwood, Tennessee USA 37024

1-800-251-8007

Fax (615) 373-6633

INTERNATIONAL PICTORIALS

IMPORTANT: The following pictorials are lo-

cated on your unit or on literature supplied

with the product. Before you operate the

unit, learn and understand the purpose for

each pictorial.

NOTE: Illustrations and pictorials begin

on page 2.

Safety Warning Pictorials (Figure 23)

1

WARNING

2

IMPORTANT: Read Owner’s Manual

Before Operating This Machine.

3

WARNING: Thrown Objects. Keep

Bystanders Away. Read User Instructions

Before Operating This Machine.

4

WARNING: Do Not Use This Machine On

Slopes Greater Than 10 Degrees.

5

DANGER: Keep People, Especially

Children, Away From Unit.

6

DANGER: No Step.

7

DANGER: Keep Feet And Hands Away

From Rotating Blade.

8

Declared airborne sound power level of 100

dB(A) is in accordance with Directive

2000/14/EC.

9

DANGER: Disconnect Spark Plug Wire

Before Servicing Unit.

10 WARNING: Hot Surface.
11 WARNING: Use Caution When Connecting

Or Disconnecting Accessories.

12 WARNING: Crushed Fingers.
13 IMPORTANT: Follow Instructions In

Owner’s Manual To Level The Deck.

14 WARNING: Stay Clear Of Mower Blade As

Long As Engine Is Running.

Control And Operating Pictorials

(Figure 24)

1

Engine Start

2

Lights

3

Engine Run

4

Engine Stop

5

Engine Run

6

Brake

7

Parking Brake

8

Clutch

9

Slow

10 Fast
11 Choke
12 Oil
13 Blade Rotation Control
14 Raise
15 Fuel

Declared vibration emission values in accordance with Directive 98/37/EC.

Vibration Emission according to BS EN 1032: Seat < 0,5 m/s

2

,

Right Running Board 2,35 m/s

2

, Left Running Board 4,34 m/s

2

Vibration Emission according to BS EN 1033: Steering Wheel 6,28 m/s

2

Values determined with operator in operating position when the machine was

operated stationary on a concrete surface at 2850 min-1.

MODEL NO.: 405607x52A

SERIAL NO.:
2850 min-1
172 kg

SKU No.:

Assembled in Lawrenceburg, TN 38464, U.S.A.

YYYY MM DD:

Declared airborne sound power level of 100 dB(A) is in accordance with Directive
2000/14/EC.

Sound Pressure Level at operator position

82 dB.

Values determined at ear according to the specifications of EN 836/A2:2001.