High End Systems AXON - Manual (Page 216)

APPENDIX A
DMX Protocol
196 Axon Media Server User Manual
10 NA
Control
Function*
Lamp OFF (80) 90-98
NA
0 0
Reserved 99-119
Shutdown (80) 120-130
Reserved 131-144
Graphics System Reset (80) 145-149
Camera Reset 150-155
Home Pan/Tilt (20) 160-168
Reserved 169
Home Focus/Zoom/Iris (20) 170-178
Reserved 179
Using the Projector’s Menu System
Projector Menu 180-184
NA
Projector Up arrow 185-188
Projector Down arrow 189-192
Projector Left arrow 193-196
Projector Right arrow 197-200
Store menu selection 201-204
Projector Floor Orientation
Active
Commands
205-208
Projector Ceiling Orientation 209-212
Projector Front Projection 213-216
Projector Rear Projection 217-220
Changing Projector Inputs (Set Dimmer Channel = 0)
External RGBHV to Projector 221-224
NA
Graphics Engine to Projector (default) 225-228
Changing Graphics Engine Inputs (Set Dimmer Channel = 0)
S-Video In to Graphic Engine, Internal Camera to
Camera Out
229-232
NA
Internal Camera to Graphics Engine (default) 233-236
Setting Projector Lens Shift (Set Dimmer Channel = 0)
Lens Shift Engaged (100) This feature is
available only in DL.3 fixtures.
237-240
Lens Shift Off (100) This feature is available
only in DL.3 fixtures.
241-244
Setting SDI Switching Mode
Camera Routed to SDI Output (100) This feature
is available only in DL.3 fixtures.
245-248
NA
SDI Input Routed to Capture Card (100) This
feature is available only in DL.3 fixtures.
249-252
Reserved 253-255 99-100
Channel #
Function Description
Value Default
DL.3
DL.2
Axon dec. % dec. %
* To prevent inadvertent triggering, some Control Function options won’t activate until the value has been
held for a period of time. A number in parenthesis is the minimum number of consecutive times a DMX
value must be received from a controller before the operation begins.