Before you begin, Assembly step you’re finished, Location of the bike – Horizon Fitness R3 User Manual
Page 7: Adjusting levelers
BEFORE
YOU
BEGIN
12
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
BIKE
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
13
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
BIKE
OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
BEFORE YOU
BEGIN
ASSEMBL
Y
BEFORE YOU BEGIN
ASSEMBLY STEP
YOU’RE FINISHED!
BOLT (A)
SET SCREW (I)
MAST BOOT
SPRING WASHER (B)
FLAT WASHER (C)
CONSOLE MAST
SPRING WASHER (B)
UPPER HANDLEBAR
BOLT (K)
CONSOLE MAST WIRES
SCREWS (L)
WATER BOTTLE CAGE
CONSOLE WIRES
BOLT (A)
SET SCREW (I)
TOP CAP
SPRING WASHER (B)
FLAT WASHER (C)
CONSOLE MAST
CONSOLE WIRES
SPRING WASHER (B)
UPPER HANDLEBAR
BOLT (K)
SET SCREW (I)
10 mm
Qty: 1
SCREW (L)
10 mm
Qty: 2
BOLT (A)
20 mm
Qty: 4
BOLT (K)
15 mm
Qty: 2
WASHER (C)
18 mm
Qty: 4
SPRING WASHER (B)
15.4 mm
Qty: 6
HARDWARE BAG FOR STEP CONTENTS :
Open
HARDWARE BAG FOR STEP 6.
Slide the
MAST BOOT onto the MAST as shown.
Tie the
CONSOLE WIRES to the pre-attached
twist tie. Carefully pull console wires through
the
CONSOLE MAST. Discard twist tie when
finished.
Attach the
CONSOLE MAST to the MAIN FRAME
using 4
BOLTS (A), 4 SPRING WASHERS (B)
and 4
FLAT WASHERS (C) from the sides and
1
SET SCREW (I) from the front.
Attach the
UPPER HANDLEBAR to the CONSOLE
MAST using 2 BOLTS (k) and 2 SPRING
WASHERS (B).
Attach the
CONSOLE MAST wires to the
CONSOLE wires and carefully tuck the
CONSOLE MAST wires into the CONSOLE MAST
before attaching the
CONSOLE.
Attach
CONSOLE to the CONSOLE MAST using
the 4
PRE-ATTACHED SCREWS (screws will
have to be removed from the console first).
DO NOT PINCH WIRES!
Attach
WATER BOTTLE CAGE using
2
SCREWS (L).
Connect
AC ADAPTOR to the AC ADAPTOR
INPUT, located at front of the main frame.
Connect
ADAPTOR to a power outlet.
A
B
C
D
E
F
G
H
CONGRATULATIONS!
on choosing your bike. You’ve taken an important step in developing and
sustaining an exercise program! Your bike is a tremendously effective tool for achieving your personal
fitness goals. Regular use of your bike can improve the quality of your life in so many ways.
HERE ARE jUST A FEW OF THE HEALTH BENEFITS OF ExERCISE:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
The key to reaping these benefits is to develop an exercise habit. Your new bike will help you eliminate
obstacles that prevent you from exercising. Inclement weather and darkness won't interfere with your
workout when you use your bike in the comfort of your home. This guide provides you with basic information
for using and enjoying your new machine.
LOCATION OF THE BIKE
Place the bike on a level surface. Do not place the bike in any area that will block any vent or air openings.
The bike should not be located in a garage, covered patio, near water or outdoors.
ADJUSTING LEVELERS
Adjust the 2 rear levelers so that the bike is level on the floor. Then adjust the third leveler located
under the BASE FRAME TUBE just so it is snug with the floor.
LOCK ADJUSTMENT
ADJUST HEIGHT
H-Series_R3_Rev.1.6.indd 12-13
7/17/08 3:04:19 PM