Horizon Fitness R3 - Manual (Page 5)

BEFORE
YOU
BEGIN
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
BIKE
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
BIKE
OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
MAIN FRAME
CONNECT WIRES
BASE FRAME
BOLT (A)
SPRING WASHER (B)
WASHER (C)
ASSEMBLY STEP 2
Open HARDWARE BAG FOR STEP 2.
Connect wires from BASE FRAME to MAIN FRAME.
Slide MAIN FRAME into BASE FRAME.
Attach the BASE FRAME to the MAIN FRAME using 5 BOLTS (A), 5 SPRING WASHERS (B) and
5 WASHERS (C).
DO NOT PINCH WIRES!
A
B
C
D
SPRING WASHER (B)
15.4 mm
Qty: 5 WASHER (C)
18 mm
Qty: 5 BOLT (A)
20 mm
Qty: 5
HARDWARE BAG FOR STEP 2 CONTENTS :
ASSEMBLY STEP 3
RIGHT PEDAL RIGHT CRANK ARM
LEFT PEDAL
PEDAL STRAP
LEFT CRANK ARM
PEDAL STRAP
Note: There is no hardware bag for this step.
Attach the PEDAL STRAP to the PEDALS.
Attach the RIGHT PEDAL onto the RIGHT CRANk ARM, tightening it CLOCkWISE with the provided
13mm/15mm FLAT WRENCH.
Attach the LEFT PEDAL onto the LEFT CRANk ARM, tightening it COUNTER-CLOCkWISE with the provided
13mm/15mm FLAT WRENCH.
Note: The LEFT CRANk ARM is reverse threaded so it is very important that it is tightened
COUNTER-CLOCkWISE. Tightening it the opposite way can damage the pedal or the crank arm or both.
A
B
C
H-Series_R3_Rev.1.6.indd 8-9 7/17/08 3:04:01 PM