HP C6100 - Manual (Page 6)

6 • HP All-in-One
15 Choose ONE connection type (A, B or C)
A: USB Connection - Do not connect yet
B: Ethernet (Wired) Network
C: Wireless Network
Use this connection type if you want to connect the HP All-in-One
directly to one computer. (Do not connect the USB cable until step
A2) .
Equipment needed: USB cable.
For a USB connection, go to Section A (page 7) for instructions .
Use this connection type if you want an Ethernet cable
connection between the HP All-in-One and your network.
Equipment needed: router and Ethernet cable.
For an Ethernet cable connection, go to Section B (page 9) for
instructions .
Use this connection type if you want a wireless
(802.11 b or g) connection between the HP All-in-One and your
network. Equipment needed: wireless router*.
For a wireless network connection, go to Section C1 (page 11) for
instructions.
*Note: If you do not have a wireless router, but want to connect
your wireless computer to the HP All-in-One, see the Wireless Ad
Hoc Network Setup section in the Basics Guide.