HP C6100 - Manual (Page 5)

HP All-in-One • 5
13
14
a
b
Close the access door and follow the prompts
a After you close the access door, a prompt appears
to load plain white paper. Make sure paper is
loaded, and then press OK to start the process.
The device initializes the ink cartridges and aligns
the printer. This takes approximately 5 minutes.
Connect the HP All-in-One
b After the alignment page is printed, alignment is
complete. Check the display for status, then press
OK . Recycle or discard the alignment page.
CAUTION: Do not disconnect or turn off the
HP All-in-One during this time. You may hear the
device making noises.
Continue to the next page for instructions on connecting your HP All-in-One to your computer or
your network.