Honeywell RAPID EYE K5404V9 User Manual
Page 26
View: Operator Guide
2–10
Table 2
Microsoft Windows: Display Properties, Settings
Screen area
(pixels)
Recommended by Honeywell
for viewing higher video resolutions
1600 by 1200
yes
1280 by 1024
yes
1152 by 864
no
1024 by 768
no
800 by 600
no
640 by 480
no
* Video can still be viewed and worked with by using smaller screen area settings; see
figure 15.
!
!
!
!25 To change a PC monitor’s Refresh Rate
1.
On the Microsoft Windows' desktop, click Start. A list of menus appears
showing the Settings menu.
2. Click
Control Panel on the Settings menu. A Control Panel window appears.
3. Click
the
Display icon, in the Control Panel window. The Display Properties
window appears.
4. Click
the
Settings tab, in the Display Properties window.
5. Click
Advanced…, on the Settings tab. It takes a few seconds before a
General tab and others are displayed in another window.
6.
Do one of the following:
•
Click the Monitor tab. You can change the Refresh Frequency, as needed.
•
Click the Adapter tab, then click List All Modes…. You can change the refresh
rate (Hertz) along with a screen area with one click, as needed.
7. Click
OK. The tabs for advanced settings disappear and the Display Properties
window is shown.
8. Click
Close. For some settings, you need to restart your computer.
Higher refresh rates can alleviate eye fatigue when monitoring video over time.
Not all monitors and video cards support the recommended resolutions or offer various
refresh rates. Consult the documentation supplied with your monitor and video card.
Recorded video
For recording video, your organization’s Multi SA sets a resolution, depending on
storage and application needs. Resolution settings for recorded video are discussed in
the Admin user guide, K5403. The flexibility of setting resolutions independently for
recording video contributes to optimal system performance.
The setting for the resolution of recorded video does not change when live video
alters its resolution on-the-fly.