Hitachi VT-MX411AC User Manual
Page 47
TIMER RECORDING
47
Then, press CH
or
button to point to AM or PM. (Example: PM)
8 Set the channel number
Press CH
or
button repeatedly until your desired channel number appears. (Example: 16)
9 Set the tape speed
Press CH
or
button repeatedly until your desired tape speed appears. (Example: SP)
• "AUTO" is available only with Program No. 1.
See "Just-In Time Recording" on page 25 for the use of "AUTO" setting.
10 Exit the program mode
Press MENU button. Program 1 is now completed.
To set another program, repeat steps [1] to [10].
11 Set the timer
Press POWER button. This turns the VCR power off, and the "
" indicator lights up on the
display. The number of all programmed events are displayed with current time.
TO CORRECT AN AUTOMATIC TIMER PROGRAM
If you want to correct an automatic timer after you finished setting program,
1) Repeat steps [1] to [3] on previous page.
2) Select a digit you want to change using SELECT button or ADD/DELETE button.
3) Enter correct numbers using CH
or
button.
4) Press MENU button to return to original mode.
5) Press POWER button to return to timer stand-by mode.
TO STOP AN AUTOMATIC TIMER PROGRAM WHICH HAS ALREADY
STARTED