Hitachi VT-MX411AC - Manual (Page 21)

PRESET FOR USE
21
TO DELETE PRESET CHANNEL
The channels you no longer receive or seldom watch can be deleted from the memory. (Of
course, you can add the deleted channel into the memory again.)
NOTE: You must use the remote control for this procedure.
Make sure...
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel as located on the back
of the VCR. (CH 3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on the display.
1 Select the main menu
Press MENU button. The main menu appears on the TV screen.
2 Select "INITIALIZE"
Press CH
or button repeatedly to point to "INITIALIZE".
Then, press SELECT button.
3 Select "CHANNEL SET UP"
Press CH
or button repeatedly to point to "CHANNEL SET UP".
Then, press SELECT button.
4 Select "ADD/DELETE CH"
Press CH
or button repeatedly to point to "ADD/DELETE CH".
Press SELECT button.