Independent dry programme – Hotpoint WD71 User Manual

Page 11

Select optional wash &

dry features (pages 15 -

16), you will hear a beep

and the Infobubble™ will

display the selection.

Switch ‘ON’, a coloured

band indicates selection.

The Infobubble™ will

display ’Select

Programme’

Independent Dry Programme

IMPORTANT INFORMATION: Before selecting an independent drying

programme, ensure the mains button is in the ‘OFF’ position.

Remove wet laundry

and dosing ball (if used)

until the correct ‘Drying

Weight Load’ (page 14)

is left in the drum.

Close door by applying

pressure at the

2 o’clock position.

WARNINGS

● If your appliance is not

permanently plumbed

in, turn on the cold

water supply to the

appliance and hook the

drain hose over the

sink to enable the

condensing action to

work.

● The dryer is intended

for use only where

water is used for the

cleaning process.

● Be careful not to touch

the drum at the top as

this area gets hot

during drying.

● On no account should

liquid fabric conditioner

be added during the

drying process.

● Misuse of the dryer may

create a fire hazard.

Press ‘START’, the door

will lock and the

symbol will appear in the

Infobubble™ throughout

the wash & dry

programme.

1-2 minutes after

completion of the wash

programme the

symbol will disappear

and the door can be

opened. Switch ‘OFF’

after use.