Horizon Fitness DT680 - Manual (Page 9)

INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
8
Open HARDWARE BAG 2.
With running deck in lowered
position, place CONSOLE
on upright masts. Slide the
brackets that are underneath the
console into the top holes of the
upright masts.
Place LOCK WASHER (C) and
BOLT (B) into flat side of LEFT
upright MAST and lightly tighten.
Place ARC WASHER (D) and BOLT
(B) into curved side of LEFT
upright MAST and lightly tighten.
Gently lift RIGHT side of the
console to connect the CONSOLE
CABLE. Carefully tuck wires in
mast to avoid damage. NOTE: Do
not pinch console cable or grip
pulse wires.
Repeat steps C-D above to
assemble the right side upright
mast and console.
Tighten all bolts completely.
ASSEMBLY STEP 2
A
B
C
D
E
F
G
* Be sure to tighten bolts after all are lined up.
ASSEMBLED IN STEP 2-D
#0-5 #
NN
2UZ
UPQWJFX
BOHMFWJFX
-0$,8"4)&3 $
2UZ
"3$8"4)&3 %
2UZ
HARDWARE BAG 2 CONTENTS :
ARC WASHER (D)
BOLT (B)
LOCK
WASHER (C)
ARC WASHER (D)
CONSOLE CABLE
DO NOT ATTACH THIS
SIDE UNTIL STEP 2-F