Hitachi VT-MX431A - Manual (Page 46)

RENTAL PLAYBACK
46
RENTAL PLAYBACK
This function enables you to improve the picture quality when playing back worn cassettes
such as rented tapes.
• Selecting ON or OFF must be done during playback.
1 Insert rental tape into VCR
Begin playback.
2 Select "VCR SET UP" VCR SET UP
Press the MENU button until the VCR SET UP menu appears.
3 Select "RENTAL"
Press the PLAY/
or STOP/ button to point to "RENTAL".
4 Select "RENTAL" to [ON]
Press the F.FWD/ button so that "RENTAL ON" appears.
• Once you select the Rental mode, it stays in effect even after you turn off the VCR.
• To stop playback, press the STOP button.
TO EXIT THE RENTAL PLAY MODE
Repeat steps [1 ] to [3], and press the F.FWD/ button so that "RENTAL OFF" appears.
Power failure: If there is a power failure for more than 30 second, Rental Playback will go to
off.