Hitachi VT-MX431A - Manual (Page 32)

pg. 15 CLOCK SET UP
32
Press the PLAY/ or STOP/ button to point to "AM" or "PM"
(Example: PM)
8 Start the clock
Press the RESET/EXIT or F.FWD/ button.
Although seconds are not displayed, they begin counting from 00 when you press the
RESET/EXIT or F.FWD/ button. Use this feature to synchronize the clock with the correct
time.
· When unplugging the AC-cord or if there is a power failure for more than 30 seconds, you
may have to reset the clock.
· If the display shows an abnormal reading or no reading, unplug the power cord for more than
30 seconds. Then plug it back in. And reset clock.
TO CHANGE CLOCK SETTING
1 ) Press the MENU button until the INITIALIZE menu appears.
2) Press the PLAY/
or STOP/ button to point to "SETTING CLOCK". Then, press the
F.FWD/ button.
3) Follow steps [2] to [8].